Table of Contents
| Table of Contents | ||
|---|---|---|
|
...
Overview
This document describes how to install Black Duck in Pivotal Container Services (PKS). PKS provides an enterprise-grade Kubernetes (K8s) environment in which to deploy clusters.
Note: Pivotal currently disables IPv6 in PKS. To successfully run Black Duck in clusters with IPv6 disabled, certain configuration items must be set in order for Black Duck to bind only to the IPv4 protocol. These configuration items are described below, and are required for PKS.
Prerequisites
Refer to the Pivotal documentation (or speak with your Pivotal support representative) to set up PKS. To ensure there are enough resources for the provisioning of Black Duck, refer to the hardware requirements section in the Black Duck Installation Guide for Kubernetes guide when creating the cluster for the Black Duck server.
Installing Black Duck
Once your Pivotal cluster is set up and is sized appropriately, simply follow the instructions in the Black Duck Installation Guide for Kubernetes to install Black Duck.
Important note: As stated above, at the time of this writing IPv6 is not supported by PKS. In order for Black Duck to function properly in this environment, you must follow the specific instructions to disable IPv6 /wiki/spaces/BDLM/pages/65831228 (search for "Disabling IPv6").
Post-Installation Steps
If the variable replacement and initial command to deploy Black Duck was successful, the following command yields the specific output for your Black Duck namespace:
...